Heat shrink solder sleeve wire shield terminators
2025/7/8 viewers
- BrandDEEM
- TypeDS-RS
Introduction
ApplicationsOne piece design, used for shield to ground termination. High performance PE transparent sleeve provides insulation, inspection, strain relief and water proof.
Preinstalled ground lead and pre-fluxed solder perform provides a perfectly soldered, strain-relieved and environmentally protected terminal.
Features
Shrink ratio 2:1
Abrasion and chemical corrosion resistance
Transparent sleeve provides precise inspection
Operating temperature:
Operating temperature:-55°C~125°C
Minimum shrink temperature:80°C
Technical data
Item
Typical Data
Operating temperature
-55℃~125℃
Shrink temperature
>160℃
Dielectric strength
1kv
Protection type
IP67
| Part No. | Heat Shrink tube(mm) | Solder sleeve(mm) | Preinstalled wire lead( mm) | ||||
| D | L | d | H | A.W.G | mm2 | L2 | |
| 270 | 2.7±0.5 | 25±2.0 | 2.7 | 2.5 | 22 | 0.5 | 165 |
| 450 | 4.8±0.5 | 30±2.0 | 4.5 | 2.5 | 22 | 0.5 | 180 |
| 600 | 6.0±0.5 | 32±2.0 | 6.0 | 3.5 | 22 | 0.5 | 180 |
| 700 | 7.3±0.5 | 31±2.0 | 7.0 | 3.5 | 22 | 0.5 | 180 |
| 870 | 8.7±0.5 | 35±2.0 | 8.7 | 3.5 | 22 | 0.5 | 180 |
| 1070 | 10.7±0.5 | 35±2.0 | 10.7 | 3.5 | 22 | 0.5 | 180 |
| 1150 | 11.5±0.5 | 34±2.0 | 11.5 | 4.2 | 22 | 0.5 | 180 |
| 1300 | 13±0.5 | 45±2.0 | 13 | 4.5 | 22 | 0.5 | 180 |
| 1780 | 18±0.5 | 56±2.0 | 18 | 6.0 | 22 | 0.5 | 180 |
More Products
